NSN 5306-01-587-2994
Close Tolerance Hex Head Bolt
42.5 millimeters fastener length, hexagon head style, between 4.7 millimeters and 5.0 millimeters head height, width between flats: between 16.7 millimeters and 17.3 millimeters .
Manufacturer part number NA0036-110028 for national stock number 5306015872994.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-587-2994.
-
MPN or Model
NA0036-110028
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Direction
Right-hand -
Thread Length
14.5 millimeters -
Fastener Length
42.5 millimeters -
Head Style
Hexagon -
Head Height
Between 4.7 millimeters and 5.0 millimeters -
Width Between Flats
Between 16.7 millimeters and 17.3 millimeters -
Grip Diameter
Between 10.9 millimeters and 11.0 millimeters -
Thread Diameter
10.0 millimeters -
Grip Length
28.0 millimeters -
Min. Tensile Strength (psi)
1100 megapascals -
Thread Pitch In Millimeters
1.3 -
Part Name Assigned By Controlling Agency
Bolt, close tolerance, hexagon head, alloy steel, 1100 mpa, metric -
Material
Steel comp e4340 or steel comp 8740 -
Material Specification
Mil-s-5000 military specification single material response or mil-s-6049 military specification single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type ii, class 2 federal specification single treatment response -
Thread Series Designator
Mj
More from these suppliers
- 5940-00-168-3316 MPN NAS1387-3Conductor Splice
- 5940-01-135-7077 MPN AS1745-3Conductor Splice
- 5940-01-384-3987 MPN NAS1063A2TB107ADTerminal Board Marker Strip
- 5940-01-451-2665 MPN NAS1063A10-105BMTerminal Board Marker Strip
- 5305-00-007-6179 MPN NAS1100E04-9Machine Screw
- 5305-00-008-9117 MPN NAS1190E04T4LSocket Head Cap Screw
- 5305-00-057-0500 MPN MS51958-4Machine Screw
- 5305-00-057-0509 MPN MS51958-12Machine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-587-2994 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NA0036-110028 | National Aerospace Standards |