NSN 5306-01-588-8100
Close Tolerance Hex Head Bolt
0.750 inches fastener length, double hexagon w/hole head style, 0.330 inches head height, width between flats: between 0.305 inches and 0.313 inches .
Manufacturer part number SAE-AS91111-04 for national stock number 5306015888100.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-588-8100.
-
MPN or Model
SAE-AS91111-04
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.625 inches -
Fastener Length
0.750 inches -
Head Style
Double hexagon w/hole -
Head Height
0.330 inches -
Width Between Flats
Between 0.305 inches and 0.313 inches -
Extended Washer Diameter
0.438 inches -
Extended Washer Thickness
Between 0.060 inches and 0.070 inches -
Grip Diameter
Between 0.2494 inches and 0.2499 inches -
Thread Diameter
0.250 inches -
Grip Length
0.125 inches -
Thready Qty Per Inch (tpi)
28 -
Surface Finish
32.0 microinches bearing surface of head -
Material
Stainless steel -
Material Specification
A-55731 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-01-097-7666 MPN AS50151Electrical Plug Connector
- 5935-01-134-9775 MPN MS3406DJ28B-21PElectrical Plug Connector
- 5935-01-180-8238 MPN AS85049/37Electrical Connector Backshell
- 5935-01-236-6723 MPN AS50151Electrical Plug Connector
- 5935-01-260-2917 MPN M85049/11-40WElectrical Connector Backshell
- 5935-01-272-8941 MPN M85049/10-21BElectrical Connector Backshell
- 5935-01-294-7662 MPN M85049/10-83WElectrical Connector Backshell
- 5935-01-349-6561 MPN M85049/1819W07Electrical Connector Backshell
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-588-8100 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
SAE-AS91111-04 | Society Of Automotive Engineers Inc |
MS9111-04 | Society Of Automotive Engineers Inc |
SAE-AS91111-04 | Sae International |
SAE-AS91111-04 | Sae International |