NSN 5306-01-591-1378
Coaxial Connector
0.682 inches fastener length, hexagon head style, 0.125 inches head height, width between flats: 0.429 mils and 0.439 centimeters.
Manufacturer part number NAS6304-5D for national stock number 5306015911378.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-591-1378.
-
MPN or Model
NAS6304-5D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.370 inches -
Fastener Length
0.682 inches -
Head Style
Hexagon -
Head Height
0.125 inches -
Width Between Flats
0.429 mils and 0.439 centimeters -
Hole Diameter
0.081 inches -
Grip Diameter
0.2485 mils and 0.2495 centimeters -
Thread Diameter
0.250 inches -
Grip Length
0.312 inches -
Hole Quantity
1 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hole Configuration Style
Round -
Material
Plastic polyamide locking feature -
Material Specification
Mil-dtl-18240 military specification single material response locking feature -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type ii, class 2 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5940-01-425-7410 MPN NAS1063A11-314Terminal Board Marker Strip
- 5940-01-451-2685 MPN NAS1063E3-551WTerminal Board Marker Strip
- 5940-01-451-4412 MPN NAS1063A3-504AHTerminal Board Marker Strip
- 5305-00-054-9242 MPN MS24694C101Machine Screw
- 5305-00-057-0526 MPN NASM51958Machine Screw
- 5305-00-059-3655 MPN MS51958-59Machine Screw
- 5305-00-151-5680 MPN NAS1218-08-9PMachine Screw
- 5305-00-162-4066 MPN NAS1221-08-6PMachine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-591-1378 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6304-5D | National Aerospace Standards |