NSN 5306-01-593-3019
Coaxial Connector
Between 3.138 inches and 3.183 inches fastener length, dished hexagon head style, between 0.250 inches and 0.265 inches head height, width between flats: between 0.741 inches and 0.752 inches .
Manufacturer part number NAS6408A38X for national stock number 5306015933019.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-593-3019.
-
MPN or Model
NAS6408A38X
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.523 inches and 0.533 inches -
Fastener Length
Between 3.138 inches and 3.183 inches -
Head Style
Dished hexagon -
Head Height
Between 0.250 inches and 0.265 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
Grip Diameter
Between 0.5141 inches and 0.5151 inches -
Thread Diameter
0.500 inches -
Grip Length
Between 2.365 inches and 2.385 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Titanium alloy uns r56400 -
Material Specification
Ams4928 assn standard single material response or ams4967 assn standard single material response -
Surface Treatment
Aluminum -
Surface Treatment Specification
Nas4006 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-072-8977 MPN 69-27580-1Reverser Bearing Block
- 4920-00-075-1994 MPN A02E5862-1Flight Control System Test Set
- 4920-00-212-1363 MPN F52303Hydraulic Test Plug
- 1680-00-219-3594 MPN 3-55758-2Stabilizer Jac Lock
- 1560-00-310-9715 MPN 8-7476-19Aircraft Structural Plate
- 1560-00-317-0541 MPN 6-52349-7Aircraft Structural Component Support
- 1560-00-327-0761 MPN 9-64816-1Airframe Flap Hinge
- 1680-00-335-8291 MPN 5-98328Bell Crank
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
![Mechanic Bill explains Coaxial Connector](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5306-01-593-3019 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6408A38X | The Boeing Company |
Stock Check
![](/public/images/partscage_shelf3.png)