NSN 5306-01-593-3025
Coaxial Connector
Between 3.263 inches and 3.308 inches fastener length, dished hexagon head style, between 0.250 inches and 0.265 inches head height, width between flats: between 0.741 inches and 0.752 inches .
Manufacturer part number NAS6408A40X for national stock number 5306015933025.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-593-3025.
-
MPN or Model
NAS6408A40X
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.523 inches and 0.533 inches -
Fastener Length
Between 3.263 inches and 3.308 inches -
Head Style
Dished hexagon -
Head Height
Between 0.250 inches and 0.265 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
Grip Diameter
Between 0.5141 inches and 0.5151 inches -
Thread Diameter
0.500 inches -
Grip Length
Between 2.490 inches and 2.510 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Titanium alloy uns r56400 -
Material Specification
Ams4928 assn standard single material response or ams4967 assn standard single material response -
Surface Treatment
Aluminum -
Surface Treatment Specification
Nas4006 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 4820-00-024-3913 MPN 9-23084-3Directional Control Linear Valve Sleeve And Slide
- 1560-00-073-2449 MPN 107S8364-2Door Assembly
- 1680-00-319-2897 MPN 5-85913Seat Chute Support
- 1560-00-563-9115 MPN 60-6769Aircraft Structural Plate
- 1560-00-602-4601 MPN 90-2481Nose Gear Light Bracket
- 1560-00-651-8253 MPN 60-5199-2Safety Latch Bracket
- 1560-00-770-7773 MPN 5-86071-51Aircraft Structural Panel
- 1560-00-858-9925 MPN 69-19042-1Rudder Nose Fairing
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
![Mechanic Bill explains Coaxial Connector](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5306-01-593-3025 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6408A40X | The Boeing Company |
Stock Check
![](/public/images/partscage_shelf3.png)