NSN 5306-01-593-3981
Coaxial Connector
Between 1.877 inches and 1.922 inches fastener length, dished hexagon head style, between 0.188 inches and 0.203 inches head height, width between flats: between 0.554 inches and 0.564 inches .
Manufacturer part number NAS6406A20X for national stock number 5306015933981.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-593-3981.
-
MPN or Model
NAS6406A20X
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.449 inches and 0.459 inches -
Fastener Length
Between 1.877 inches and 1.922 inches -
Head Style
Dished hexagon -
Head Height
Between 0.188 inches and 0.203 inches -
Width Between Flats
Between 0.554 inches and 0.564 inches -
Grip Diameter
Between 0.3891 inches and 0.3901 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 1.235 inches and 1.270 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Titanium alloy uns r56400 -
Material Specification
Ams4928 assn standard single material response or ams4967 assn standard single material response -
Surface Treatment
Aluminum -
Surface Treatment Specification
Nas4006 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-320-4962 MPN 9-61963-4Aircraft Structural Panel
- 1560-00-340-9458 MPN 60-2896Fillet Flap Drive Coupling
- 1680-00-346-2143 MPN 3-93533Windshield Stop
- 1560-00-440-9586 MPN 69-10063-2Adjustment Rudder Weight
- 1560-00-533-2745 MPN 50-1566-2Door Support Latch
- 1560-00-588-6886 MPN 66-3364-1Aircraft Structural Component Support
- 1560-00-594-6237 MPN 5-86506-67Lower Wing Panel Assembly
- 1560-00-775-3340 MPN 35-8272Bleed Air Duct Assembly
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
![Mechanic Bill explains Coaxial Connector](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5306-01-593-3981 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6406A20X | The Boeing Company |
Stock Check
![](/public/images/partscage_shelf3.png)