NSN 5306-01-597-2885
Coaxial Connector
Hexagon head style, 0.312 inches head height, 0.928 inches width between flats, thread diameter: 0.625 inches.
Manufacturer part number NAS464P10A35 for national stock number 5306015972885.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-597-2885.
-
MPN or Model
NAS464P10A35
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Head Style
Hexagon -
Head Height
0.312 inches -
Width Between Flats
0.928 inches -
End Application
5935-01-118-9183 -
Thread Diameter
0.625 inches -
Thready Qty Per Inch (tpi)
18 -
Part Name Assigned By Controlling Agency
Bolt - shear, close tolerance -
Material
Steel -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-601-9282 MPN 23-1921-1Radome Strut Fitting
- 1560-00-607-2124 MPN 69-5048Air Line Support Clamp Bracket
- 1560-00-607-8945 MPN 34-1231-4Wing Panel Assembly
- 1560-00-609-0730 MPN 29-5158-501Transmitter Gearbox Assembly
- 1560-00-614-2373 MPN 25-8429Water Pump Drain Manifold
- 1560-00-630-2603 MPN 35-2467-501Aircraft Fuel Tank
- 1560-00-631-7637 MPN 39-5324Radome Attachment Bolt
- 1560-00-658-4290 MPN 25-11554-503Hail Shield Assy
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
![Mechanic Bill explains Coaxial Connector](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5306-01-597-2885 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS464P10A35 | The Boeing Company |
Stock Check
![](/public/images/partscage_shelf3.png)