NSN 5306-01-597-4699
Coaxial Connector
0.417 inches fastener length, hexagon head style, 0.110 inches head height, width between flats: 0.372 inches .
Manufacturer part number NAS6703DU1 for national stock number 5306015974699.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-597-4699.
-
MPN or Model
NAS6703DU1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.345 inches -
Fastener Length
0.417 inches -
Head Style
Hexagon -
Head Height
0.110 inches -
Width Between Flats
0.372 inches -
Hole Diameter
0.046 inches -
Thread Diameter
0.190 inches -
Hole Quantity
3 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
32 -
Hole Configuration Style
Hexagon corners -
Material
Stainless steel -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-470-3349 MPN NAS1063A20-500BFTerminal Board Marker Strip
- 5940-01-511-8758 MPN NAS1063A10-10ADTerminal Board Marker Strip
- 5935-01-355-3702 MPN AS34061Electrical Plug Connector
- 5305-00-009-0517 MPN NAS1393C00-7Machine Screw
- 5305-00-051-8308 MPN MS24693-S40Machine Screw
- 5305-00-081-2651 MPN MS51038-15Setscrew
- 5305-00-192-0500 MPN NAS604-4PMachine Screw
- 5305-00-205-3917 MPN MS27039-8-08Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
![Mechanic Bill explains Coaxial Connector](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5306-01-597-4699 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6703DU1 | National Aerospace Standards |
Stock Check
![](/public/images/partscage_shelf3.png)