NSN 5306-01-600-0662
Coaxial Connector
Tcto 1b-1b-1464; ribbed offset cruciform recess.
Manufacturer part number NAS1580A4R62 for national stock number 5306016000662.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-600-0662.
-
MPN or Model
NAS1580A4R62
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.403 inches -
Fastener Length
4.278 inches -
Head Style
Flat countersunk -
Head Diameter
0.507 inches -
Grip Diameter
0.249 inches -
End Application
B-1b -
Thread Diameter
0.249 inches -
Grip Length
3.875 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
100.0 degrees -
Material
Steel -
Surface Treatment
Cadmium
More from these suppliers
- 5940-01-451-4411 MPN NAS1063A2-107ALTerminal Board Marker Strip
- 5305-00-012-0719 MPN NAS1635-00-8Machine Screw
- 5305-00-059-3658 MPN NAS1635-3-7Machine Screw
- 5305-00-159-5554 MPN NAS1101E08-8Machine Screw
- 5305-00-163-2686 MPN NAS1133-28Close Tolerance Screw
- 5305-00-228-6728 MPN NAS1190-3T14NSocket Head Cap Screw
- 5305-00-268-6479 MPN MS35646-611Eye Screw
- 5305-00-269-2805 MPN MS90726-62Hexagon Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
![Mechanic Bill explains Coaxial Connector](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5306-01-600-0662 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580A4R62 | National Aerospace Standards |
NAS1580A4R62 | National Aerospace Standards |
NAS1580A4R62 | National Aerospace Standards |
NAS1580A4R62 | National Aerospace Standards |
Stock Check
![](/public/images/partscage_shelf3.png)