NSN 5306-01-600-4270
Coaxial Connector
Surface:dry film coating.
Manufacturer part number 3M1275E4D10AL for national stock number 5306016004270.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-600-4270.
-
MPN or Model
3M1275E4D10AL
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
Unjf-3a -
Thread Direction
Right-hand -
Thread Length
0.425 inches -
Fastener Length
1.050 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.4970 inches and 0.5066 inches -
Grip Diameter
Between 0.2646 inches and 0.2651 inches -
End Application
F/a-18e/f aircraft, super hornet -
Thread Diameter
0.250 inches -
Grip Length
0.625 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Nickel alloy 718 -
Material Specification
Ams-5662 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-250-2144 MPN AIC551C3-647Shoulder Screw
- 5305-00-316-7484 MPN AIC812-02-2Machine Screw
- 5305-01-085-6757 MPN AIC811-06-15Socket Head Cap Screw
- 5305-01-169-6749 MPN AIC4040V3-03Close Tolerance Screw
- 5305-01-206-7260 MPN HT4068-3D6AClose Tolerance Screw
- 5305-01-417-2495 MPN TX1027D4-20Close Tolerance Screw
- 5305-01-435-3939 MPN BACB30LU7-49Close Tolerance Screw
- 5305-01-435-6493 MPN BACB30LU9-25Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
![Mechanic Bill explains Coaxial Connector](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5306-01-600-4270 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3M1275E4D10AL | Boeing Company, The |
3M1275E4D10AL | Huck International, Inc. |
3M1275E4D10AL | Sps Technologies, Llc |
3M1275E4D10AL | Sps Technologies, Llc |
3M1275E4D10AL | Arconic Global Fasteners & Rings, |
3M1275E4D10AL | Sps Technologies, Llc |
3M1275E4D10AL | Fastener Innovation Technology, Inc. |
3M1275E4D10AL | West Coast Aerospace Inc |
3M1275E4D10AL | Sps Technologies, Llc |
3M1275E4D10AL | Alcoa Global Fasteners, Inc. |
3M1275E4D10AL | Hi-shear Corporation |
11857E4D10AL | Reid Products Inc. |
3M1275E4D10AL | B & B Specialties Inc. |
Stock Check
![](/public/images/partscage_shelf3.png)