NSN 5306-01-601-1245
Coaxial Connector
1.050 inches fastener length, hexagon head style, 0.125 inches head height, width between flats: between 0.429 inches and 0.439 inches .
Manufacturer part number NAS6704HU10 for national stock number 5306016011245.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-601-1245.
-
MPN or Model
NAS6704HU10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.425 inches -
Fastener Length
1.050 inches -
Head Style
Hexagon -
Head Height
0.125 inches -
Width Between Flats
Between 0.429 inches and 0.439 inches -
Hole Diameter
0.046 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
0.625 inches -
Hole Quantity
3 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hole Configuration Style
Hexagon corners -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response or ams 5732 assn standard single material response or ams 5737 assn standard single material response or ams 5853 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-465-6149 MPN NAS1745-9Conductor Splice
- 5940-01-451-2685 MPN NAS1063E3-551WTerminal Board Marker Strip
- 5940-01-451-4407 MPN NAS1063A10-105BVTerminal Board Marker Strip
- 5305-00-006-8306 MPN NAS1100E06-4PMachine Screw
- 5305-00-008-5914 MPN NAS1100C06-28Machine Screw
- 5305-00-008-7856 MPN NAS1742C04T6USocket Head Cap Screw
- 5305-00-057-7183 MPN NAS1351-3-10Socket Head Cap Screw
- 5305-00-079-7962 MPN MS24694S210Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-601-1245 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6704HU10 | National Aerospace Standards |
Stock Check
- NS: 96
- NE: 5235