NSN 5306-01-601-7673
Coaxial Connector
4.583 inches fastener length, hexagon head style, 0.625 inches head height, width between flats: between 1.801 inches and 1.814 inches .
Manufacturer part number NAS6220-56 for national stock number 5306016017673.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-601-7673.
-
MPN or Model
NAS6220-56
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.083 inches -
Fastener Length
4.583 inches -
Head Style
Hexagon -
Head Height
0.625 inches -
Width Between Flats
Between 1.801 inches and 1.814 inches -
Grip Diameter
Between 1.2475 inches and 1.2490 inches -
Thread Diameter
1.250 inches -
Grip Length
3.500 inches -
Thready Qty Per Inch (tpi)
12 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 -
Material Specification
Ams 6349 assn standard single material response or ams 6382 assn standard single material response or ams6415 assn standard single material response or ams6484 assn standard single material response or ams6322 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type ii, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-008-5897 MPN NAS1102C5-14Machine Screw
- 5305-00-054-4912 MPN NAS1635-02-18Machine Screw
- 5305-00-061-8243 MPN ANSM24693Machine Screw
- 5305-00-068-7064 MPN MS35277-44Machine Screw
- 5305-00-079-2588 MPN NAS1154-29Close Tolerance Screw
- 5305-00-080-9237 MPN NAS584-10TMachine Screw
- 5305-00-150-3411 MPN NAS1191-08P10NSocket Head Cap Screw
- 5305-00-205-3463 MPN NAS1351-4H10Socket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-601-7673 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6220-56 | National Aerospace Standards |
NAS1120-56 | National Aerospace Standards |
Stock Check
- NE: 5