NSN 5306-01-602-8342
Close Tolerance Hex Head Bolt
1.385 inches fastener length, flat countersunk head style, 0.303 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number NAS4703-17 for national stock number 5306016028342.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-602-8342.
-
MPN or Model
NAS4703-17
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.323 inches -
Fastener Length
1.385 inches -
Head Style
Flat countersunk -
Head Diameter
0.303 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Point Diameter
Between 0.181 inches and 0.184 inches -
Point Style
Flat -
Thread Diameter
0.190 inches -
Grip Length
1.062 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp e4340 or steel comp 8740 -
Material Specification
Mil-s-5000 military specification single material response or mil-s-6049 military specification single material response or ams6322 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-413, type ii, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-003-9326 MPN NAS6002U16Machine Screw
- 5305-00-057-0528 MPN MS51958-46Machine Screw
- 5305-00-058-2090 MPN MS24618-50Tapping Screw
- 5305-00-078-8708 MPN MS51045-18Setscrew
- 5305-00-143-9583 MPN NAS2805-17Close Tolerance Screw
- 5305-00-205-3463 MPN NAS1351-4H10Socket Head Cap Screw
- 5305-00-206-3650 MPN NAS517-6-14Machine Screw
- 5305-00-206-3713 MPN MS35214-46Machine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-602-8342 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS4703-17 | National Aerospace Standards |
NAS4703-17 | National Aerospace Standards |