NSN 5306-01-603-8596
Coaxial Connector
5.277 inches fastener length, hexagon head style, 0.312 inches head height, width between flats: between 0.928 inches and 0.940 inches .
Manufacturer part number NAS6610-70 for national stock number 5306016038596.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-603-8596.
-
MPN or Model
NAS6610-70
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.902 inches -
Fastener Length
5.277 inches -
Head Style
Hexagon -
Head Height
0.312 inches -
Width Between Flats
Between 0.928 inches and 0.940 inches -
Grip Diameter
0.898 inches -
End Application
Missile -
Thread Diameter
0.6250 inches -
Grip Length
4.375 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Chamfer Angle
Between 10.0 degrees and 20.0 degrees -
Part Name Assigned By Controlling Agency
Cage: bolt, tension, hex head, close tolerance -
Material
Steel comp 4140 or steel comp 4340 or steel comp e4340 or steel comp 8740 -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type ii, class 2 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-005-0438 MPN GB510FH5-14PClose Tolerance Screw
- 5305-00-354-4605 MPN HT4024L3-9Close Tolerance Screw
- 5305-00-935-7513 MPN NAS1101-00-3Machine Screw
- 5305-01-132-0518 MPN ST3M714-5-12Close Tolerance Screw
- 5305-01-435-6493 MPN BACB30LU9-25Close Tolerance Screw
- 5305-01-458-3548 MPN PBF1166-3-11RClose Tolerance Screw
- 5305-01-530-2435 MPN 120-225C08R08PClose Tolerance Screw
- 5305-01-627-6892 MPN JSFB38-5-24DMachine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
![Mechanic Bill explains Coaxial Connector](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5306-01-603-8596 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6610-70 | Sps Technologies, Llc |
Stock Check
![](/public/images/partscage_shelf3.png)