NSN 5306-01-604-2876
Coaxial Connector
Embrittlement requirement per nas4002.
Manufacturer part number NAS6610-39 for national stock number 5306016042876.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-604-2876.
-
MPN or Model
NAS6610-39
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.902 inches -
Fastener Length
3.34 inches -
Head Style
Dished hexagon -
Head Height
Between 0.312 inches and 0.327 inches -
Width Between Flats
Between 0.928 inches and 0.940 inches -
Grip Diameter
Between 0.623 inches and 0.624 inches -
End Application
Ac130h acft -
Thread Diameter
0.625 inches -
Grip Length
Between 2.428 inches and 2.448 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Part Name Assigned By Controlling Agency
Bolt, tension, hex head, close tollerance -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 -
Material Specification
Ams6349 assn standard single material response or ams6382 assn standard single material response or ams6415 assn standard single material response or ams6484 assn standard single material response or ams6322 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-958-3962 MPN NAS1397R-2NGrounding Metallic Shielded Cable Ferrule
- 5940-01-394-5134 MPN NAS707S1Stud Terminal
- 5935-01-517-5412 MPN SAE AS50151Electrical Receptacle Connector
- 5940-00-827-0772 MPN NAS1063A6-1Terminal Board Marker Strip
- 5305-00-051-8495 MPN MS24625-11Tapping Screw
- 5305-00-054-8434 MPN NAS1102-02-6Machine Screw
- 5305-00-057-0530 MPN NASM51958Machine Screw
- 5305-00-067-3863 MPN NAS1189-3P7LSocket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
![Mechanic Bill explains Coaxial Connector](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5306-01-604-2876 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6610-39 | National Aerospace Standards |
NAS6610-39 | The Boeing Company |
Stock Check
![](/public/images/partscage_shelf3.png)