NSN 5306-01-604-8277
Coaxial Connector
0.345 inches fastener length, hexagon head style, between 0.110 inches and 0.115 inches head height, width between flats: 0.410 inches .
Manufacturer part number BACB30LM3K2 for national stock number 5306016048277.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-604-8277.
-
MPN or Model
BACB30LM3K2
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.1900 inches -
Fastener Length
0.345 inches -
Head Style
Hexagon -
Head Height
Between 0.110 inches and 0.115 inches -
Width Between Flats
0.410 inches -
Grip Diameter
Between 0.1879 inches and 0.1885 inches -
End Application
E-3 block 404 -
Thread Diameter
0.367 inches -
Grip Length
0.345 inches -
Thready Qty Per Inch (tpi)
A32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Part Name Assigned By Controlling Agency
Bolt, hex head -
Material
Stainless steel -
Material Specification
Ams 5737 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Ams qq-p-426 type ii, class2 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-00-342-1477 MPN 90-4011-1Brak Plate Assembly
- 1560-00-392-5162 MPN 90-5529-3003Aircraft Structural Plate
- 5905-00-434-1758 MPN BACRH14U34000BFFilm Fixed Resistor
- 5905-00-523-8829 MPN BACR14CH19R10BFInductive Wire Wound Fixed Resistor
- 1560-00-630-1327 MPN 65-30007-5Aircraft Structural Panel
- 1560-00-671-8665 MPN 5-86312-102Door Seal Assembly
- 1560-00-675-0309 MPN 69-5022Carpet Trim Channel
- 5940-00-682-2477 MPN BACT12N1Lug Terminal
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
![Mechanic Bill explains Coaxial Connector](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5306-01-604-8277 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LM3K2 | The Boeing Company |
BACB30LM | The Boeing Company |
BACB30LM3K2 | The Boeing Company |
BACB30LM | The Boeing Company |
BACB30LM3K2 | The Boeing Company |
BACB30LM | The Boeing Company |
BACB30LM3K2 | The Boeing Company |
BACB30LM | The Boeing Company |
Stock Check
![](/public/images/partscage_shelf3.png)