NSN 5306-01-605-9046
Coaxial Connector
0.019 inches fastener length, spline drive shear head head style, 0.450 inches head height, grip diameter: 2.528 inches .
Manufacturer part number MS14157-08026 for national stock number 5306016059046.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-605-9046.
-
MPN or Model
MS14157-08026
-
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Direction
Right-hand -
Thread Length
0.5000 inches -
Fastener Length
0.019 inches -
Head Style
Spline drive shear head -
Head Height
0.450 inches -
Grip Diameter
2.528 inches -
Head Minor Diameter
Between 0.547 inches and 0.562 inches -
End Application
V-22 -
Grip Length
0.010 inches -
Nonstandard Thread Pitch Diameter
-0.818 to 0.828 inches -
Min. Tensile Strength (psi)
30900 pounds per square inch -
Part Name Assigned By Controlling Agency
External spline drive -
Material
Steel comp 4140 -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-007-9881 MPN NAS1100C04-7PMachine Screw
- 5305-00-043-0267 MPN MS24693-C274Machine Screw
- 5305-00-052-8900 MPN MS24630-51Tapping Screw
- 5305-00-059-3524 MPN MS35308-358Hexagon Head Cap Screw
- 5305-00-079-2575 MPN NAS1100-4-7Machine Screw
- 5305-00-104-7537 MPN NAS1189-04P6LSocket Head Cap Screw
- 5305-00-255-5527 MPN NAS1101-06-12Machine Screw
- 5305-00-281-8151 MPN NAS1608-36Shoulder Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-605-9046 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS14157-08026 | National Aerospace Standards |