NSN 5306-01-605-9255
Coaxial Connector
3.465 inches fastener length, hexagon head style, 0.281 inches head height, width between flats: between 0.865 inches and 0.877 inches .
Manufacturer part number NAS6709DHU42 for national stock number 5306016059255.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-605-9255.
-
MPN or Model
NAS6709DHU42
-
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.840 inches -
Fastener Length
3.465 inches -
Head Style
Hexagon -
Head Height
0.281 inches -
Width Between Flats
Between 0.865 inches and 0.877 inches -
Hole Diameter
0.070 inches -
Grip Diameter
Between 0.5610 inches and 0.5615 inches -
Shank Unthreaded Hole Diameter
0.141 inches fastener -
Thread Diameter
0.562 inches -
Grip Length
2.625 inches -
Hole Quantity
3 and 1 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hole Configuration Style
Hexagon corners -
Distance From Head Largest Bearing Surface To Shank Hole Center
3.247 inches fastener -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response or ams 5732 assn standard single material response or ams 5737 assn standard single material response or ams 5853 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Ams 2700, method 1, type 2 or 8, class 1 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-137-4487 MPN NAS1643R16T24SNElectrical Plug Connector
- 5935-00-528-8440 MPN NAS1641R16T24SNElectrical Receptacle Connector
- 5305-00-003-9266 MPN NAS514P1032-19Machine Screw
- 5305-00-008-5896 MPN NAS1102E5-10Machine Screw
- 5305-00-058-9374 MPN MS51977-41Setscrew
- 5305-00-079-7961 MPN MS24694S209Machine Screw
- 5305-00-138-9907 MPN NAS1133V34Close Tolerance Screw
- 5305-00-146-2524 MPN MS51850-86Tapping Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-605-9255 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6709DHU42 | National Aerospace Standards |
Stock Check
- NE: 377
- NS: 1