NSN 5306-01-606-1391
Wheel Bolt
2.853 inches fastener length, hexagon head style, 0.375 inches head height, width between flats: between 1.052 inches and 1.065 inches .
Manufacturer part number NAS6612-29 for national stock number 5306016061391.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-606-1391.
-
MPN or Model
NAS6612-29
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.041 inches -
Fastener Length
2.853 inches -
Head Style
Hexagon -
Head Height
0.375 inches -
Width Between Flats
Between 1.052 inches and 1.065 inches -
Grip Diameter
Between 0.7480 inches and 0.7490 inches -
Thread Diameter
0.750 inches -
Grip Length
1.812 inches -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 -
Material Specification
Ams6349 assn standard single material response or ams6382 assn standard single material response or ams6415 assn standard single material response or ams6484 assn standard single material response or ams6322 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type ii, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-520-8560 MPN NAS1641R18T31SNElectrical Receptacle Connector
- 5940-01-425-7397 MPN NAS1063A10-330Terminal Board Marker Strip
- 5940-01-451-4408 MPN NAS1063A10-105BXTerminal Board Marker Strip
- 5940-01-394-5134 MPN NAS707S1Stud Terminal
- 5305-00-078-9643 MPN MS27039-1-34Machine Screw
- 5305-00-081-6728 MPN MS24667-31Socket Head Cap Screw
- 5305-00-102-3007 MPN NAS1218-3-9PMachine Screw
- 5305-00-142-5048 MPN NAS1156V8Close Tolerance Screw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-606-1391 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6612-29 | National Aerospace Standards |