NSN 5306-01-606-5279
Coaxial Connector
96ksi shear strength.
Manufacturer part number NAS6616-2 for national stock number 5306016065279.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-606-5279.
-
MPN or Model
NAS6616-2
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.254 inches and 0.274 inches -
Fastener Length
Between 1.419 inches and 1.449 inches -
Head Style
Hexagon -
Head Height
Between 0.500 inches and 0.515 inches -
Width Between Flats
Between 1.427 inches and 1.440 inches -
Grip Diameter
Between 0.998 inches and 0.999 inches -
Thread Diameter
1.0 inches -
Grip Length
Between 0.115 inches and 0.135 inches -
Thready Qty Per Inch (tpi)
12 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp 4140 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-430-4123 MPN NAS1063A10-502ASTerminal Board Marker Strip
- 5940-01-470-3349 MPN NAS1063A20-500BFTerminal Board Marker Strip
- 1680-01-571-7708 MPN 10367-A-1032-17Controller Handle
- 1560-01-659-0276 MPN 520-14082-2Aircraft Structural Component Support
- 5940-01-447-2944 MPN NAS1063A3-504ALTerminal Board Marker Strip
- 5305-00-007-1590 MPN NAS1102C04-5PMachine Screw
- 5305-00-007-3025 MPN NAS1102E04-6BMachine Screw
- 5305-00-007-6174 MPN NAS1100E00-10Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
![Mechanic Bill explains Coaxial Connector](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5306-01-606-5279 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6616-2 | National Aerospace Standards |
Stock Check
![](/public/images/partscage_shelf3.png)