NSN 5306-01-607-7837
Close Tolerance Hex Head Bolt
Between 1.766 inches and 1.798 inches fastener length, hexagon head style, between 0.172 inches and 0.204 inches head height, width between flats: 0.460 inches .
Manufacturer part number AN175C14 for national stock number 5306016077837.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-607-7837.
-
MPN or Model
AN175C14
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.532 inches -
Fastener Length
Between 1.766 inches and 1.798 inches -
Head Style
Hexagon -
Head Height
Between 0.172 inches and 0.204 inches -
Width Between Flats
0.460 inches -
Hole Diameter
0.076 inches -
Grip Diameter
Between 0.3112 inches and 0.3117 inches -
Thread Diameter
0.313 inches -
Grip Length
1.062 inches -
Hole Type
Drilled -
Nonstandard Thread Pitch Diameter
+0.267 to 0.313 inches -
Thready Qty Per Inch (tpi)
24 -
Material
Stainless steel -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-259-1143 MPN AN3102A28-4SElectrical Receptacle Connector
- 5935-00-636-5972 MPN AN3108A32-5PElectrical Plug Connector
- 5305-00-150-9267 MPN AN503-416-12Machine Screw
- 5305-00-151-1494 MPN AN520-3R7Machine Screw
- 5305-00-274-1002 MPN AN500C8R10Machine Screw
- 5305-00-281-8529 MPN AN115911Machine Screw
- 5305-00-282-4816 MPN AN507-1032-12Machine Screw
- 5305-00-514-8249 MPN AN507-420R48Machine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-607-7837 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN175C14 | Aeronautical Standards Group |
AN175C14 | Aeronautical Standards Group |
Stock Check
- NS: 18
- NE: 212