NSN 5306-01-608-2650
Coaxial Connector
0.698 inches fastener length, spline drive shear head head style, 0.164 inches head height, grip diameter: 0.249 inches .
Manufacturer part number HS6212-4A2 for national stock number 5306016082650.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-608-2650.
-
MPN or Model
HS6212-4A2
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.698 inches -
Fastener Length
0.698 inches -
Head Style
Spline drive shear head -
Head Height
0.164 inches -
Grip Diameter
0.249 inches -
Head Minor Diameter
0.439 inches -
Thread Diameter
0.249 inches -
Grip Length
0.573 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
6980 pounds per square inch -
Material
Nickel alloy 718 -
Thread Series Designator
Unjf
More from these suppliers
- 4820-01-159-0443 MPN 7-211642032Pressure And Temperature Relief Valve
- 1560-01-163-7035 MPN 7-311180071A Left Hand Support
- 1680-01-174-5836 MPN 7-318000174Bell Crank
- 1560-01-224-9224 MPN 7-211610002Louver Support Assy
- 1560-01-242-9195 MPN 7-311651018-9Truss Assembly
- 1560-01-258-2964 MPN 369H90062-5Lh Step Assy
- 1560-01-274-4599 MPN 7-311180080-29Aircraft Structural Plate
- 1560-01-377-1841 MPN 74A731166-2007Aircraft Stiffener
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
![Mechanic Bill explains Coaxial Connector](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5306-01-608-2650 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HS6212-4A2 | Boeing Company, The |
Stock Check
![](/public/images/partscage_shelf3.png)