NSN 5306-01-608-7899
Coaxial Connector
Between 1.2653 inches and 1.3123 inches fastener length, hexagon head style, 0.125 inches head height, width between flats: between 0.428 inches and 0.440 inches .
Manufacturer part number NAS464P4A15 for national stock number 5306016087899.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-608-7899.
-
MPN or Model
NAS464P4A15
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.3278 inches and 0.3748 inches -
Fastener Length
Between 1.2653 inches and 1.3123 inches -
Head Style
Hexagon -
Head Height
0.125 inches -
Width Between Flats
Between 0.428 inches and 0.440 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
End Application
A10 -
Thread Diameter
0.25 inches -
Grip Length
0.9375 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-435-3634 MPN NAS1063C2-21FTerminal Board Marker Strip
- 5305-00-052-7434 MPN MS24629-60Tapping Screw
- 5305-00-104-7537 MPN NAS1189-04P6LSocket Head Cap Screw
- 5305-00-104-7537 MPN NAS1189-04P6LSocket Head Cap Screw
- 5305-00-182-9373 MPN NAS1634-11Machine Screw
- 5305-00-186-9211 MPN NAS1704-26Shoulder Screw
- 5305-00-253-5631 MPN MS21318-57Drive Screw
- 5305-00-527-4894 MPN NAS517-5-0Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
![Mechanic Bill explains Coaxial Connector](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5306-01-608-7899 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS464P4A15 | National Aerospace Standards |
Stock Check
![](/public/images/partscage_shelf3.png)