NSN 5306-01-609-5982
Close Tolerance Hex Head Bolt
1.578 inches fastener length, hexagon head style, between 0.203 inches and 0.235 inches head height, width between flats: between 0.553 inches and 0.565 inches .
Manufacturer part number AN176C14 for national stock number 5306016095982.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-609-5982.
-
MPN or Model
AN176C14
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.640 inches -
Fastener Length
1.578 inches -
Head Style
Hexagon -
Head Height
Between 0.203 inches and 0.235 inches -
Width Between Flats
Between 0.553 inches and 0.565 inches -
Grip Diameter
Between 0.3737 inches and 0.3742 inches -
Shank Unthreaded Hole Diameter
0.106 inches and 0.116 inches first hole -
End Application
Aircraft, air force -
Thread Diameter
0.375 inches -
Grip Length
0.938 inches -
Thready Qty Per Inch (tpi)
24 -
Minimum Yield Strength
7740 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.376 inches first hole -
Surface Finish
63.0 microinches fastener -
Part Name Assigned By Controlling Agency
Bolt, machine, close tolerance, aircraft -
Material
Stainless steel -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-201-5194 MPN AN3102E20-23PElectrical Receptacle Connector
- 5935-00-201-7492 MPN AN3106A28-16SXElectrical Plug Connector
- 5935-00-235-8012 MPN AN3102A24-21SElectrical Receptacle Connector
- 5935-00-259-1158 MPN AN3100A36-10SElectrical Receptacle Connector
- 5985-00-369-5409 MPN AS207CRT3Antenna
- 5905-00-500-6892 MPN RV6LAYSA102BNonprecision Nonwire Wound Variable Resistor
- 5935-00-636-5041 MPN AN3102E14S7SElectrical Receptacle Connector
- 4820-00-880-4743 MPN AN4103-1Temperature Regulating Valve
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-609-5982 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN176C14 | Delt Industries Inc |
AN176C14 | Lockheed Martin Corporation |
AN176C14 | Aeronautical Standards Group |
Stock Check
- NE: 70
- NS: 6