NSN 5306-01-609-8273
Close Tolerance Hex Head Bolt
Between 0.563 inches and 0.593 inches fastener length, flat countersunk head style, between 0.5504 inches and 0.5604 inches head diameter, head height: 0.077 inches .
Manufacturer part number 3M1170D6-12A for national stock number 5306016098273.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-609-8273.
-
MPN or Model
3M1170D6-12A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.3735 inches and 0.3765 inches -
Fastener Length
Between 0.563 inches and 0.593 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.5504 inches and 0.5604 inches -
Head Height
0.077 inches -
Hole Diameter
0.106 inches -
Grip Diameter
Between 0.3740 inches and 0.3745 inches -
End Application
F/a-18 e/f -
Thread Diameter
0.3750 inches -
Grip Length
0.75 inches -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Screw, close tolerance -
Material
Steel comp xm-13 -
Material Specification
Ms5629 national std/spec single material response -
Surface Treatment Specification
Mseb46.1 national std/spec single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-140-6766 MPN 32-33127-6Jet Blast Fairing Channel
- 5940-00-144-1574 MPN 5M32-4-31Lug Terminal
- 1560-00-153-9358 MPN 53-09854-303Aircraft Structural Component Support
- 4920-00-216-9279 MPN 68D390010-1001Control Cable Installing Tool
- 1560-00-242-8286 MPN 68A327406-2021Aircraft Skin
- 1560-00-253-5972 MPN 53-73030-19Nose Seal
- 1560-00-254-8909 MPN 32-31961-013Nacelle Cover
- 1560-00-255-8737 MPN 53-42001-609Door Strut Rib
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-609-8273 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3M1170D6-12A | Boeing Company, The |