NSN 5306-01-610-6382
Close Tolerance Hex Head Bolt
0.948 inches fastener length, pan head style, between 0.357 inches and 0.373 inches head diameter, head height: between 0.122 inches and 0.133 inches .
Manufacturer part number NAS7903A10 for national stock number 5306016106382.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-610-6382.
-
MPN or Model
NAS7903A10
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.323 inches -
Fastener Length
0.948 inches -
Head Style
Pan -
Head Diameter
Between 0.357 inches and 0.373 inches -
Head Height
Between 0.122 inches and 0.133 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Thread Diameter
0.1900 inches -
Grip Length
0.625 inches -
Thready Qty Per Inch (tpi)
32 -
Material
Titanium alloy uns r56400 -
Surface Treatment
Aluminum -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-005-0656 MPN NAS1152V4Close Tolerance Screw
- 5305-00-008-9119 MPN NAS1190E04T22LSocket Head Cap Screw
- 5305-00-052-5927 MPN MS35198-76Machine Screw
- 5305-00-053-1106 MPN MS35199-111Machine Screw
- 5305-00-054-6677 MPN NAS1635&08&28Machine Screw
- 5305-00-061-7962 MPN NAS1204-20WClose Tolerance Screw
- 5305-00-079-2824 MPN NAS1101C4-10Machine Screw
- 5305-00-124-3097 MPN NAS1352C8LE20Socket Head Cap Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-610-6382 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS7903A10 | National Aerospace Standards |