1-321-802-5889
Email Us

NSN 5306-01-610-9473

Close Tolerance Hex Head Bolt

About this product

0.965 inches fastener length, hexagon head style, between 0.281 inches and 0.296 inches head height, width between flats: between 0.865 inches and 0.877 inches .

Manufacturer part number NAS6709-2 for national stock number 5306016109473.

Picture of NSN 5306-01-610-9473

Datasheet

  • Product description

    Close Tolerance Bolt NSN 5306-01-610-9473.

  • MPN or Model

    NAS6709-2

  • Schedule B
    7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment)
  • NMF (National Motor Freight)
    093486 - Bolts, Nuts Or Screws, NOI (sub 3)
  • Thread Class
    3a
  • Thread Direction
    Right-hand
  • Thread Length
    0.840 inches
  • Fastener Length
    0.965 inches
  • Head Style
    Hexagon
  • Head Height
    Between 0.281 inches and 0.296 inches
  • Width Between Flats
    Between 0.865 inches and 0.877 inches
  • Grip Diameter
    Between 0.5610 inches and 0.5615 inches
  • Thread Diameter
    0.5625 inches
  • Grip Length
    0.125 inches
  • Thready Qty Per Inch (tpi)
    18
  • Part Name Assigned By Controlling Agency
    Navy special project
  • Material
    Iron alloy 660
  • Surface Treatment
    Cadmium
  • Thread Series Designator
    Unjf
More from these suppliers
Close Tolerance Bolt

An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.

Mechanic Bill explains Close Tolerance Hex Head Bolt

Pricing and Availability

Get a quote for 5306-01-610-9473 close tolerance bolt
Quantity:
Your Email:
Your Name:
Company Name:
Optional reference:
Phone:
NSN 5306016109473

We do not share, sell, or distribute your information to any third party.
Privacy | Terms

All major credit cards accepted as well as gov. p-cards
Manufacturer Part Numbers and Alternates
MPN manufacturer part number Registrant or Supplier
NAS6709-2 National Aerospace Standards
Stock Check
Availability for this item was last checked on 10/10/23. The quantities and conditions available at the time were:
  • NE: 21