NSN 5306-01-612-6537
Coaxial Connector
100 degree flush reduced head, offset cruiform, ribbed and dove tail slot 95 ksi fsu.
Manufacturer part number NAS1581K3T25 for national stock number 5306016126537.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-612-6537.
-
MPN or Model
NAS1581K3T25
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.363 inches -
Fastener Length
1.925 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.2578 inches and 0.3047 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
End Application
A400-MA-IRC-RAFT -
Thread Diameter
0.1900 inches -
Grip Length
1.562 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
1600 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Bolt, shear -
Material
Titanium -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-959-6481 MPN NAS715-23BElectrical Receptacle Connector
- 5305-00-050-9217 MPN MS24678-48CSocket Head Cap Screw
- 5305-00-052-8881 MPN MS24630-13Tapping Screw
- 5305-00-057-0490 MPN MS24694-S4Machine Screw
- 5305-00-151-6242 MPN NAS1218-3-5Machine Screw
- 5305-00-273-4956 MPN MS24677-50Socket Head Cap Screw
- 5305-00-282-3623 MPN NAS334PA11Machine Screw
- 5305-00-282-8788 MPN NAS229-19Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-612-6537 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1581K3T25 | National Aerospace Standards |