NSN 5306-01-612-6937
Coaxial Connector
0.844 inches fastener length, hexagon head style, 0.125 inches head height, width between flats: 0.492 inches .
Manufacturer part number NAS6605DH6 for national stock number 5306016126937.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-612-6937.
-
MPN or Model
NAS6605DH6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.469 inches -
Fastener Length
0.844 inches -
Head Style
Hexagon -
Head Height
0.125 inches -
Width Between Flats
0.492 inches -
Grip Diameter
0.460 inches -
Thread Diameter
0.3125 inches -
Grip Length
0.375 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125 megapascals -
Material
Steel comp 4140 -
Thread Series Designator
Unjf
More from these suppliers
- 5905-01-263-1788 MPN NAS43D01-16Inductive Wire Wound Fixed Resistor
- 5940-01-547-0035 MPN NAS1389-2Conductor Splice
- 5940-01-384-3924 MPN NAS1063C5TB177ATerminal Board Marker Strip
- 5940-01-451-4892 MPN NAS1063A20-500AZTerminal Board Marker Strip
- 5940-01-510-2783 MPN NAS1063C3Terminal Board Cover
- 5940-01-384-3964 MPN NAS1063C5TB177BTerminal Board Marker Strip
- 5305-00-008-5920 MPN NAS1190E04T5LSocket Head Cap Screw
- 5305-00-056-9961 MPN MS24693-C4Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
![Mechanic Bill explains Coaxial Connector](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5306-01-612-6937 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6605DH6 | National Aerospace Standards |
Stock Check
![](/public/images/partscage_shelf3.png)