NSN 5306-01-617-8218
Coaxial Connector
4.395 inches fastener length, spline extended washer head style, 0.562 inches head height, extended washer diameter: between 1.153 inches and 1.163 inches .
Manufacturer part number MS21297-10054 for national stock number 5306016178218.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-617-8218.
-
MPN or Model
MS21297-10054
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
1.005 inches -
Fastener Length
4.395 inches -
Head Style
Spline extended washer -
Head Height
0.562 inches -
Extended Washer Diameter
Between 1.153 inches and 1.163 inches -
Extended Washer Thickness
Between 0.080 inches and 0.100 inches -
Grip Diameter
Between 0.6230 inches and 0.6240 inches -
Head Minor Diameter
Between 0.673 inches and 0.688 inches -
End Application
F16 -
Thread Diameter
0.6250 inches -
Grip Length
3.375 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Steel -
Thread Series Designator
Un
More from these suppliers
- 5940-01-396-9984 MPN NAS1063A10-TB105ATerminal Board Marker Strip
- 5940-01-413-3006 MPN NAS1063B112-128Terminal Board Marker Strip
- 5940-01-447-2950 MPN NAS1063C3-504BETerminal Board Marker Strip
- 5935-01-577-3543 MPN MS27488-20-2Electrical Connector End Seal Plug
- 5305-00-052-5952 MPN MS35198-103Machine Screw
- 5305-00-067-3461 MPN NAS1352C4L412Socket Head Cap Screw
- 5305-00-068-8429 MPN MS24667-1Socket Head Cap Screw
- 5305-00-104-7537 MPN NAS1189-04P6LSocket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
![Mechanic Bill explains Coaxial Connector](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5306-01-617-8218 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21297-10054 | National Aerospace Standards |
MS21297-10054 | Lockheed Martin Corporation |
NAMS21297-10054 | National Aerospace Standards |
Stock Check
![](/public/images/partscage_shelf3.png)