NSN 5306-01-618-8011
Coaxial Connector
Material is h-11 steel. Temp rating is 900 f max..
Manufacturer part number 68485-6-042 for national stock number 5306016188011.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-618-8011.
-
MPN or Model
68485-6-042
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.419 inches -
Fastener Length
0.794 inches -
Head Style
Double hexagon -
Head Height
0.210 inches -
Width Between Flats
Between 0.553 inches and 0.564 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Single Shear Strength
156000 pounds per square inch -
End Application
Various c5 -
Thread Diameter
0.375 inches -
Grip Length
0.375 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
640 megapascals -
Material
Steel -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-562-2594 MPN HST12AZ5-7Materi Aircraft Pin
- 1560-01-575-2570 MPN 3M943E4-5-6Headle Shoulder Pin
- 5305-00-142-4519 MPN NAS1189-04P5Socket Head Cap Screw
- 5305-00-243-8319 MPN NAS1101E4-6Machine Screw
- 5305-00-343-0947 MPN LS15237C3-6Close Tolerance Screw
- 5305-00-680-5412 MPN NAS1204-48Close Tolerance Screw
- 5305-00-823-5808 MPN NAS1102-06-12Machine Screw
- 5305-00-959-6985 MPN KS812-1024-8Socket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
![Mechanic Bill explains Coaxial Connector](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5306-01-618-8011 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
68485-6-042 | Sps Technologies, Llc |
Stock Check
![](/public/images/partscage_shelf3.png)