NSN 5306-01-620-4076
Coaxial Connector
1.390 inches fastener length, dished hexagon head style, 0.188 inches head height, width between flats: 0.559 inches .
Manufacturer part number NAS6806U13 for national stock number 5306016204076.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-620-4076.
-
MPN or Model
NAS6806U13
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.578 inches -
Fastener Length
1.390 inches -
Head Style
Dished hexagon -
Head Height
0.188 inches -
Width Between Flats
0.559 inches -
Grip Diameter
0.374 inches -
End Application
F-35 -
Thread Diameter
0.375 inches -
Grip Length
0.812 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Part Name Assigned By Controlling Agency
Bolt, tension, hex head, close tolerance -
Material
Titanium alloy uns r56400 -
Thread Series Designator
Unjf
More from these suppliers
- 1560-01-571-8130 MPN NAS1677D29W37NAir Retaining Strap
- 5935-00-111-1892 MPN NAS1665-16Electrical Connector Backshell
- 5935-01-322-4929 MPN NAS820-32AElectrical Connector Cover
- 5305-00-001-4017 MPN NAS1352-3LE8PSocket Head Cap Screw
- 5305-00-007-9881 MPN NAS1100C04-7PMachine Screw
- 5305-00-008-9112 MPN NAS1190E02T3LSocket Head Cap Screw
- 5305-00-044-4863 MPN MS27039-4-30Machine Screw
- 5305-00-053-1079 MPN MS35199-42Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-620-4076 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6806U13 | National Aerospace Standards |