NSN 5306-01-620-4124
Coaxial Connector
1.016 inches fastener length, dished hexagon head style, 0.188 inches head height, width between flats: 0.559 inches .
Manufacturer part number NAS6806U7 for national stock number 5306016204124.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-620-4124.
-
MPN or Model
NAS6806U7
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.578 inches -
Fastener Length
1.016 inches -
Head Style
Dished hexagon -
Head Height
0.188 inches -
Width Between Flats
0.559 inches -
Grip Diameter
0.374 inches -
End Application
F-35 -
Thread Diameter
0.375 inches -
Grip Length
0.438 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Part Name Assigned By Controlling Agency
Bolt, tension, hex head, close tolerance -
Material
Titanium alloy uns r56400 -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-381-7134 MPN NAS1063B246-255Terminal Board Marker Strip
- 5940-01-444-8249 MPN NAS1063A2-107BUTerminal Board Marker Strip
- 5305-00-021-3918 MPN MS35308-355Hexagon Head Cap Screw
- 5305-00-133-3598 MPN MS24694A109Machine Screw
- 5305-00-146-2474 MPN NAS602-34Machine Screw
- 5305-00-174-8696 MPN NAS1219C3-10Machine Screw
- 5305-00-182-9376 MPN MS27039C0822Machine Screw
- 5305-00-182-9571 MPN NAS1122C5HClose Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-620-4124 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6806U7 | National Aerospace Standards |