NSN 5306-01-621-2172
Coaxial Connector
1.645 inches fastener length, double hexagon w/hole head style, between 0.378 inches and 0.398 inches head height, width between flats: 0.4375 inches .
Manufacturer part number MBT50-6-16 for national stock number 5306016212172.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-621-2172.
-
MPN or Model
MBT50-6-16
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.645 inches -
Fastener Length
1.645 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.378 inches and 0.398 inches -
Width Between Flats
0.4375 inches -
Extended Washer Diameter
Between 0.639 inches and 0.649 inches -
Extended Washer Thickness
Between 0.081 inches and 0.101 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Thread Diameter
0.375 inches -
Grip Length
1.000 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type ii, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-01-514-9721 MPN 160D611705-54Aircraft Structural Component Fitting
- 5305-00-017-5131 MPN 3M123-3-6Close Tolerance Screw
- 5305-00-283-4690 MPN NAS1221-08-4PMachine Screw
- 5305-00-310-6419 MPN HT4028L8-11Close Tolerance Screw
- 5305-00-915-2562 MPN NAS1124-5Close Tolerance Screw
- 5305-00-939-0867 MPN NAS1131-6Close Tolerance Screw
- 5305-01-043-8057 MPN HT193LB3-9Close Tolerance Screw
- 5305-01-121-5498 MPN HT4067-4-11AClose Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-621-2172 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MBT50-6-16 | Hi-shear Corporation |
MBT50-6-16 | Lockheed Martin Corporation |
Stock Check
- NE: 408
- NS: 158