NSN 5306-01-621-4731
Coaxial Connector
Rated tensile strengths are applicable only when shear nut an320 is used.
Manufacturer part number NAS464P8-85 for national stock number 5306016214731.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-621-4731.
-
MPN or Model
NAS464P8-85
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.4218 inches -
Fastener Length
Between 5.7183 inches and 5.7653 inches -
Head Style
Hexagon -
Head Height
Between 0.234 inches and 0.266 inches -
Width Between Flats
Between 0.740 inches and 0.752 inches -
Grip Diameter
Between 0.4982 inches and 0.4991 inches -
Shank Unthreaded Hole Diameter
0.106 inches and 0.116 inches all holes -
Single Shear Strength
18650 pounds per square inch -
End Application
A-10 wrp -
Thread Diameter
0.500 inches -
Grip Length
5.3125 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
9250 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
5.5625 inches all holes -
Chamfer Angle
30.0 degrees -
Part Name Assigned By Controlling Agency
Bolt shear, close tolerance -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type ii, class 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas464 professional/industrial association standard
More from these suppliers
- 5305-00-082-1760 MPN MS21287-02Machine Screw
- 5305-00-126-5148 MPN MS27039DD0823Machine Screw
- 5305-00-143-3252 MPN NAS1352C5LN24Socket Head Cap Screw
- 5305-00-205-3919 MPN NAS1218-3E6Machine Screw
- 5305-00-206-3700 MPN NAS517-3-8Machine Screw
- 5305-00-245-4621 MPN MS3212-22Machine Screw
- 5305-00-269-4513 MPN MS24694S168Machine Screw
- 5305-00-541-9067 MPN NAS1189E08P7KSocket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
![Mechanic Bill explains Coaxial Connector](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5306-01-621-4731 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS464P8-85 | National Aerospace Standards |
Stock Check
![](/public/images/partscage_shelf3.png)