1-321-802-5889
Email Us

NSN 5306-01-622-6169

Close Tolerance Hex Head Bolt

About this product

Item has a hex hole in the threaded end that is 0.0791 - 0.0806 inches across the flats and 0.080 inches deep..

Manufacturer part number WC331K5-3 for national stock number 5306016226169.

Datasheet

  • Product description

    Close Tolerance Bolt NSN 5306-01-622-6169.

  • MPN or Model

    WC331K5-3

  • Schedule B
    8108.90.8000 (Other wrought titanium, nesoi)
  • Thread Class
    3a
  • Thread Direction
    Right-hand
  • Thread Length
    0.280 inches
  • Fastener Length
    Between 0.4575 inches and 0.4775 inches
  • Head Style
    Countersunk cylindrical convex
  • Grip Diameter
    Between 0.1625 inches and 0.1635 inches
  • Head Major Diameter
    0.2532 inches
  • Internal Drive Style
    W/o internal drive
  • Thread Diameter
    0.1640 inches
  • Grip Length
    0.1875 inches
  • Thready Qty Per Inch (tpi)
    32
  • Countersink Angle
    100.0 degrees
  • Material
    Titanium
  • Material Specification
    Ams 4928 assn standard single material response or ams 4967 assn standard single material response
  • Surface Treatment
    Aluminum
  • Surface Treatment Specification
    Bms10-85, type 1, class a mfr ref single treatment response
  • Thread Series Designator
    Unjc
More from these suppliers
Close Tolerance Bolt

An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.

Mechanic Bill explains Close Tolerance Hex Head Bolt

Pricing and Availability

Get a quote for 5306-01-622-6169 close tolerance bolt
Quantity:
Your Email:
Your Name:
Company Name:
Optional reference:
Phone:
NSN 5306016226169

We do not share, sell, or distribute your information to any third party.
Privacy | Terms

All major credit cards accepted as well as gov. p-cards
Manufacturer Part Numbers and Alternates
MPN manufacturer part number Registrant or Supplier
WC331K5-3 West Coast Aerospace Inc
Stock Check
Availability for this item was last checked on 07/05/23. The quantities and conditions available at the time were:
  • NE: 1143