NSN 5306-01-622-6669
Close Tolerance Hex Head Bolt
Between 2.408 inches and 2.438 inches fastener length, hexagon head style, between 0.250 inches and 0.265 inches head height, width between flats: between 0.741 inches and 0.752 inches .
Manufacturer part number NAS6708D27 for national stock number 5306016226669.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-622-6669.
-
MPN or Model
NAS6708D27
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.735 inches -
Fastener Length
Between 2.408 inches and 2.438 inches -
Head Style
Hexagon -
Head Height
Between 0.250 inches and 0.265 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
Grip Diameter
Between 0.4985 inches and 0.4995 inches -
Shank Unthreaded Hole Diameter
0.106 inches and 0.116 inches all holes -
Thread Diameter
0.5000 inches -
Grip Length
Between 1.678 inches and 1.698 inches -
Thready Qty Per Inch (tpi)
20 -
Material
Stainless steel -
Material Specification
Ams5731 assn standard single material response or ams5732 assn standard single material response or ams5737 assn standard single material response or ams5853 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Ams-qq-p-416, type 2, class 2 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-01-625-8647 MPN MS27468T21F39SElectrical Receptacle Connector
- 5305-00-020-2826 MPN NAS1221-08-10PMachine Screw
- 5305-00-057-0496 MPN MS24694-12Machine Screw
- 5305-00-103-2959 MPN NAS1219-5-18PMachine Screw
- 5305-00-187-6076 MPN NAS606-12PMachine Screw
- 5305-00-257-6137 MPN NAS1189E06P7LKSocket Head Cap Screw
- 5305-00-281-8122 MPN NAS1581A5H8Close Tolerance Screw
- 5305-00-342-0343 MPN MS3212-17Machine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-622-6669 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6708D27 | National Aerospace Standards |