NSN 5306-01-623-1845
Coaxial Connector
3.427 inches fastener length, double hexagon w/hole head style, between 0.701 inches and 0.721 inches head height, width between flats: between 0.803 inches and 0.814 inches .
Manufacturer part number ST3M571-12-38 for national stock number 5306016231845.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-623-1845.
-
MPN or Model
ST3M571-12-38
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.052 inches -
Fastener Length
3.427 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.701 inches and 0.721 inches -
Width Between Flats
Between 0.803 inches and 0.814 inches -
Extended Washer Diameter
Between 1.220 inches and 1.230 inches -
Extended Washer Thickness
Between 0.168 inches and 0.188 inches -
Grip Diameter
Between 0.748 inches and 0.749 inches -
End Application
A-10 wrp -
Thread Diameter
0.750 inches -
Grip Length
2.375 inches -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Part Name Assigned By Controlling Agency
Bolt close tolerance 12 point flange head -
Material
Steel comp xm-13 -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-007-0287 MPN NAS1131E88PClose Tolerance Screw
- 5305-00-145-4469 MPN P82-632-5Externally Relieved Body Screw
- 5305-00-541-9045 MPN NAS1221-3-2Machine Screw
- 5305-00-902-4361 MPN NAS1102-02-5Machine Screw
- 5305-01-023-8192 MPN NAS1191-04T3BSocket Head Cap Screw
- 5305-01-084-2494 MPN HT4010-8-10Shoulder Screw
- 5305-01-217-6976 MPN HT4075V4-10-21Close Tolerance Screw
- 5305-01-220-0186 MPN BB302-6-6Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-623-1845 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
ST3M571-12-38 | Boeing Company, The |
MB84-12-38 | Hi-shear Corporation |
ST3M571 | Boeing Company, The |