NSN 5306-01-623-2190
Coaxial Connector
1.218 inches fastener length, hexagon head style, 0.203 inches head height, width between flats: 0.615 inches .
Manufacturer part number MS14181H06026L for national stock number 5306016232190.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-623-2190.
-
MPN or Model
MS14181H06026L
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
Thread Direction
Right-hand -
Thread Length
0.306 inches -
Fastener Length
1.218 inches -
Head Style
Hexagon -
Head Height
0.203 inches -
Width Between Flats
0.615 inches -
Grip Diameter
0.4358 inches -
Grip Length
0.812 inches -
Nonstandard Thread Pitch Diameter
-32.0 to 50.0 inches -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Nickel alloy 718 -
Thread Series Designator
Unf
More from these suppliers
- 5905-00-005-2497 MPN RNR55H9311FSFilm Fixed Resistor
- 5940-01-372-2503 MPN NAS1063B-61-80Terminal Board Marker Strip
- 5935-01-386-0510 MPN NAS715-19AElectrical Receptacle Connector
- 5940-01-425-7387 MPN NAS1063C8-319Terminal Board Marker Strip
- 5940-01-451-2671 MPN NAS1063E3-551RTerminal Board Marker Strip
- 5940-01-510-2081 MPN NAS1063A7Terminal Board Marker Strip
- 5940-01-666-5991 MPN NAS1063A2-536KTerminal Board Marker Strip
- 5305-00-003-6824 MPN NAS6002U26Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-623-2190 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS14181H06026L | National Aerospace Standards |