NSN 5306-01-623-4802
Close Tolerance Hex Head Bolt
1.974 inches fastener length, double hexagon head style, between 0.247 inches and 0.267 inches head height, width between flats: 0.775 inches .
Manufacturer part number ST3M453-7-22 for national stock number 5306016234802.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-623-4802.
-
MPN or Model
ST3M453-7-22
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.599 inches -
Fastener Length
1.974 inches -
Head Style
Double hexagon -
Head Height
Between 0.247 inches and 0.267 inches -
Width Between Flats
0.775 inches -
Grip Diameter
Between 0.436 inches and 0.437 inches -
Thread Diameter
0.437 inches -
Grip Length
Between 1.365 inches and 1.385 inches -
Thready Qty Per Inch (tpi)
20 -
Material
Steel comp xm-13 -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-034-5230 MPN BB302-6-2Machine Screw
- 5305-00-541-9033 MPN LS15234C3-1Close Tolerance Screw
- 5305-00-807-0526 MPN HT7N25Close Tolerance Screw
- 5305-00-808-9947 MPN 51B333-40HMachine Screw
- 5305-01-043-1879 MPN HT326-3A11Close Tolerance Screw
- 5305-01-048-6597 MPN LS15237-5-10Close Tolerance Screw
- 5305-01-087-8797 MPN BACB30LL4-14Close Tolerance Screw
- 5305-01-103-8818 MPN HT4068-3-5Close Tolerance Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-623-4802 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
ST3M453-7-22 | Boeing Company, The |
MB61-7-22 | Hi-shear Corporation |