NSN 5306-01-623-4934
Close Tolerance Hex Head Bolt
Between 2.208 inches and 2.225 inches fastener length, double hexagon head style, between 0.247 inches and 0.267 inches head height, width between flats: 0.690 inches .
Manufacturer part number MB61-7-26 for national stock number 5306016234934.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-623-4934.
-
MPN or Model
MB61-7-26
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.599 inches -
Fastener Length
Between 2.208 inches and 2.225 inches -
Head Style
Double hexagon -
Head Height
Between 0.247 inches and 0.267 inches -
Width Between Flats
0.690 inches -
Grip Diameter
Between 0.4270 inches and 0.4385 inches -
End Application
A-10 wrp -
Thread Diameter
0.4375 inches -
Grip Length
1.625 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Material
Steel comp xm-13 -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-205-3674 MPN NAS1189E06P4LSocket Head Cap Screw
- 5305-00-680-6376 MPN HT4M-19Close Tolerance Screw
- 5305-00-717-3466 MPN NAS1191-06P8ISocket Head Cap Screw
- 5305-00-932-3905 MPN HT4V-5Machine Screw
- 5305-01-042-4440 MPN HT260LB3-9Close Tolerance Screw
- 5305-01-074-9049 MPN HT307-5-13Close Tolerance Screw
- 5305-01-076-4889 MPN NAS1101-08-26Machine Screw
- 5305-01-132-6507 MPN HT295-5-12Close Tolerance Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-623-4934 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MB61-7-26 | Hi-shear Corporation |
ST3M453-7-26 | Boeing Company, The |