NSN 5306-01-623-5284
Close Tolerance Hex Head Bolt
1.766 inches fastener length, double hexagon head style, between 0.200 inches and 0.220 inches head height, width between flats: 0.564 inches .
Manufacturer part number ST3M453-6-20 for national stock number 5306016235284.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-623-5284.
-
MPN or Model
ST3M453-6-20
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.516 inches -
Fastener Length
1.766 inches -
Head Style
Double hexagon -
Head Height
Between 0.200 inches and 0.220 inches -
Width Between Flats
0.564 inches -
Grip Diameter
Between 0.374 inches and 0.375 inches -
End Application
A-10 wrp -
Thread Diameter
0.375 inches -
Grip Length
Between 1.240 inches and 1.260 inches -
Thready Qty Per Inch (tpi)
24 -
Part Name Assigned By Controlling Agency
Bolt close tolerance double hex head -
Material
Steel comp xm-13 -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-008-9112 MPN NAS1190E02T3LSocket Head Cap Screw
- 5305-00-510-5229 MPN LS15234C4-7Close Tolerance Screw
- 5305-00-541-9033 MPN LS15234C3-1Close Tolerance Screw
- 5305-00-803-0420 MPN HT3C5Machine Screw
- 5305-01-043-8057 MPN HT193LB3-9Close Tolerance Screw
- 5305-01-082-8702 MPN NAS1189-02P10BSocket Head Cap Screw
- 5305-01-095-3296 MPN HT4025L6-22Close Tolerance Screw
- 5305-01-145-6966 MPN HT4020-3-3Close Tolerance Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-623-5284 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
ST3M453-6-20 | Boeing Company, The |
MB61-6-20 | Hi-shear Corporation |