NSN 5306-01-623-7013
Coaxial Connector
Protrusion of locking elementshall be controlled so that it will pass freely, or with finger pressure, through a ring gage with diameter of 0.010 (+.001, -.000) greater than maximum major diameter of bolt thread; lockwire holes shall be drilled within 0.010 of center of hex flat.
Manufacturer part number NAS6704-56 for national stock number 5306016237013.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-623-7013.
-
MPN or Model
NAS6704-56
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.425 inches -
Fastener Length
Between 4.035 inches and 4.080 inches -
Head Style
Hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.429 inches and 0.439 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Thread Diameter
0.2500 inches -
Grip Length
Between 3.490 inches and 3.510 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Stainless steel -
Material Specification
Ams5731 national std/spec single material response and ams5732 national std/spec single material response and ams5737 national std/spec single material response and ams5853 national std/spec single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-052-9971 MPN MS24619-25Tapping Screw
- 5305-00-058-9385 MPN MS51977-63Setscrew
- 5305-00-068-5278 MPN MS24677-41Socket Head Cap Screw
- 5305-00-104-7537 MPN NAS1189-04P6LSocket Head Cap Screw
- 5305-00-150-3370 MPN MS51976-72Setscrew
- 5305-00-184-8298 MPN NAS1189E04P7LKSocket Head Cap Screw
- 5305-00-211-5508 MPN NAS1352C04H6PSocket Head Cap Screw
- 5305-00-225-7775 MPN MS16996-25Socket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
![Mechanic Bill explains Coaxial Connector](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5306-01-623-7013 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6704-56 | National Aerospace Standards |
Stock Check
![](/public/images/partscage_shelf3.png)