NSN 5306-01-624-0231
Coaxial Connector
Alloy steel 4140.
Manufacturer part number NAS2813C27 for national stock number 5306016240231.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-624-0231.
-
MPN or Model
NAS2813C27
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.323 inches -
Fastener Length
Between 1.966 inches and 2.026 inches -
Head Style
Dished hexagon -
Head Height
Between 0.110 inches and 0.125 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Grip Diameter
Between 0.188 inches and 0.189 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 1.678 inches and 1.698 inches -
Thready Qty Per Inch (tpi)
32.0 -
Min. Tensile Strength (psi)
3910 pounds per square inch -
Material
Steel -
Material Specification
Ams6382 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-437-8563 MPN NAS1063A2-107CXTerminal Board Marker Strip
- 5940-01-451-4407 MPN NAS1063A10-105BVTerminal Board Marker Strip
- 5305-00-052-5926 MPN MS35198-74Machine Screw
- 5305-00-052-6911 MPN MS24629-15Tapping Screw
- 5305-00-058-4017 MPN MS24694S119Machine Screw
- 5305-00-059-3658 MPN NAS1635-3-7Machine Screw
- 5305-00-080-7385 MPN NAS1190C08P7LSocket Head Cap Screw
- 5305-00-106-6272 MPN NAS1221-06-5PClose Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-624-0231 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS2813C27 | National Aerospace Standards |