NSN 5306-01-624-8447
Close Tolerance Hex Head Bolt
1.5 inches fastener length, spline drive shear head head style, 0.187 inches head height, grip diameter: between 0.3115 inches and 0.3120 inches .
Manufacturer part number ST3M744-5D18 for national stock number 5306016248447.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-624-8447.
-
MPN or Model
ST3M744-5D18
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.375 inches -
Fastener Length
1.5 inches -
Head Style
Spline drive shear head -
Head Height
0.187 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Head Minor Diameter
Between 0.514 inches and 0.521 inches -
End Application
F-15sa -
Thread Diameter
0.3125 inches -
Grip Length
1.125 inches -
Thready Qty Per Inch (tpi)
24 -
Material
Steel comp xm-13 -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-075-6571 MPN 32-31799-40Longeron
- 1560-00-088-9198 MPN 32-561067-5Valve Spacer
- 1560-00-089-4080 MPN 32-831562-10Tail Cone Duct
- 4820-00-132-1263 MPN 2C9138Check Valve
- 1560-00-140-9508 MPN 32-33141-3Rudder Control Bracket
- 1680-00-187-0676 MPN 53-79921-37W Switch Panel Assy
- 1560-00-219-3894 MPN 53-42002-29Main Landing Gear Door Rib
- 1560-00-255-8733 MPN 53-42001-12Door Strut Rib
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-624-8447 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
ST3M744-5D18 | Boeing Company, The |
Stock Check
- NE: 1