NSN 5306-01-625-1606
Coaxial Connector
2.373 inches fastener length, double hexagon w/hole head style, between 0.608 inches and 0.628 inches head height, width between flats: between 0.682 inches and 0.691 inches .
Manufacturer part number NAS630H24 for national stock number 5306016251606.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-625-1606.
-
MPN or Model
NAS630H24
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.873 inches -
Fastener Length
2.373 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.608 inches and 0.628 inches -
Width Between Flats
Between 0.682 inches and 0.691 inches -
Extended Washer Diameter
Between 1.040 inches and 1.050 inches -
Extended Washer Thickness
Between 0.140 inches and 0.160 inches -
Hole Diameter
Between 0.050 inches and 0.060 inches -
Grip Diameter
Between 0.6230 inches and 0.6240 inches -
End Application
Dragonspear -
Thread Diameter
0.6250 inches -
Grip Length
Between 1.490 inches and 1.510 inches -
Hole Quantity
4 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell b and 43.0 rockwell b -
Hole Configuration Style
Double hexagon longitudinal hole -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5930-00-839-3928 MPN NAS1072-1Switch Guard
- 5940-01-425-7408 MPN NAS1063A11-308Terminal Board Marker Strip
- 5940-01-384-3992 MPN NAS1063A2TB107UTerminal Board Marker Strip
- 5305-00-005-0629 MPN NAS1190E04P6NSocket Head Cap Screw
- 5305-00-022-3131 MPN NAS1352-3LL32PSocket Head Cap Screw
- 5305-00-052-7442 MPN MS24627-3Tapping Screw
- 5305-00-113-3733 MPN NAS560CK3-7Machine Screw
- 5305-00-174-0711 MPN NASM24693-S32Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
![Mechanic Bill explains Coaxial Connector](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5306-01-625-1606 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS630H24 | National Aerospace Standards |
Stock Check
![](/public/images/partscage_shelf3.png)