NSN 5306-01-625-8012
Coaxial Connector
Between 1.111 inches and 1.141 inches fastener length, flat countersunk head style, 0.4787 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number NAS1581F5T10 for national stock number 5306016258012.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-625-8012.
-
MPN or Model
NAS1581F5T10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.501 inches -
Fastener Length
Between 1.111 inches and 1.141 inches -
Head Style
Flat countersunk -
Head Diameter
0.4787 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Thread Diameter
0.3125 inches -
Grip Length
0.625 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Bolt, shear -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 -
Material Specification
Ams6382 assn standard 1st material response or ams6415 assn standard 2nd material response or ams6484 assn standard 2nd material response or ams6322 assn standard 3rd material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Ams-qq-p-416, type 2, class 2 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-410-3996 MPN NAS1667-14Electrical Connector Backshell
- 5940-00-827-0772 MPN NAS1063A6-1Terminal Board Marker Strip
- 5305-00-007-1558 MPN NAS1100E04-14PMachine Screw
- 5305-00-007-2943 MPN NAS1100E06-9PMachine Screw
- 5305-00-007-6179 MPN NAS1100E04-9Machine Screw
- 5305-00-007-6198 MPN NAS1631E26PMachine Screw
- 5305-00-150-9211 MPN MILS7839Machine Screw
- 5305-00-150-9582 MPN MILS7839Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-625-8012 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1581F5T10 | National Aerospace Standards |