NSN 5306-01-625-8018
Coaxial Connector
Between 2.079 inches and 2.109 inches fastener length, flat countersunk head style, 0.5662 inches head diameter, grip diameter: between 0.3735 inches and 0.3745 inches .
Manufacturer part number NAS1581F6T24 for national stock number 5306016258018.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-625-8018.
-
MPN or Model
NAS1581F6T24
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.594 inches -
Fastener Length
Between 2.079 inches and 2.109 inches -
Head Style
Flat countersunk -
Head Diameter
0.5662 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Thread Diameter
0.3750 inches -
Grip Length
1.500 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Bolt, shear -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 -
Material Specification
Ams6382 assn standard 1st material response or ams6415 assn standard 2nd material response or ams6484 assn standard 2nd material response or ams6322 assn standard 3rd material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Ams-qq-p-416, type 2, class 2 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-354-9983 MPN NAS1063A3-1004Terminal Board Marker Strip
- 5305-00-008-5908 MPN NAS1189E04T4LSocket Head Cap Screw
- 5305-00-057-0525 MPN NASM51958Machine Screw
- 5305-00-071-2089 MPN MS51957-89Machine Screw
- 5305-00-144-9080 MPN NAS1603T19Shoulder Screw
- 5305-00-282-6232 MPN NAS220-18Machine Screw
- 5305-00-415-2148 MPN MS51975-24Shoulder Screw
- 5305-00-541-9045 MPN NAS1221-3-2Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-625-8018 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1581F6T24 | National Aerospace Standards |