NSN 5306-01-627-1286
Coaxial Connector
Between 3.705 inches and 3.735 inches fastener length, dished hexagon head style, between 0.110 inches and 0.125 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number NAS6703-54 for national stock number 5306016271286.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-627-1286.
-
MPN or Model
NAS6703-54
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.345 inches -
Fastener Length
Between 3.705 inches and 3.735 inches -
Head Style
Dished hexagon -
Head Height
Between 0.110 inches and 0.125 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Grip Diameter
Between 0.188 inches and 0.189 inches -
End Application
B-1 -
Thread Diameter
0.190 inches -
Grip Length
Between 3.365 inches and 3.385 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Part Name Assigned By Controlling Agency
Bolt, hex head, close tolerance, a286 cres, long threads -
Material
Stainless steel -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-451-3293 MPN NAS1063E1-100HTerminal Board Marker Strip
- 5940-01-451-4412 MPN NAS1063A3-504AHTerminal Board Marker Strip
- 5940-01-447-2944 MPN NAS1063A3-504ALTerminal Board Marker Strip
- 5305-00-008-9119 MPN NAS1190E04T22LSocket Head Cap Screw
- 5305-00-022-3131 MPN NAS1352-3LL32PSocket Head Cap Screw
- 5305-00-069-4942 MPN NAS2806-15Close Tolerance Screw
- 5305-00-110-5610 MPN MS27039-0832Machine Screw
- 5305-00-126-6208 MPN MS21093-0204Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
![Mechanic Bill explains Coaxial Connector](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5306-01-627-1286 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6703-54 | National Aerospace Standards |
Stock Check
![](/public/images/partscage_shelf3.png)