NSN 5306-01-627-2883
Coaxial Connector
3holes on head of bolt with a diameter of 0.070 inches.
Manufacturer part number NAS2816-52H for national stock number 5306016272883.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-627-2883.
-
MPN or Model
NAS2816-52H
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
3.892 inches -
Fastener Length
0.454 inches -
Head Style
Hexagon -
Head Height
0.188 inches -
Width Between Flats
0.564 inches -
Grip Diameter
0.3745 inches -
End Application
M4 gun mount -
Thread Diameter
0.3735 inches -
Grip Length
3.704 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
17100 pounds per square inch -
Part Name Assigned By Controlling Agency
Shear bolt -
Material
Stainless steel -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-501-4656 MPN NAS43DD8-62FCAircr Sleeve Spacer
- 5940-01-384-3944 MPN NAS1063A2TB107ACTerminal Board Marker Strip
- 5305-00-025-4098 MPN NAS1153V32Close Tolerance Screw
- 5305-00-057-0529 MPN NASM51958Machine Screw
- 5305-00-058-2067 MPN MS24677-7Socket Head Cap Screw
- 5305-00-068-9176 MPN MS90725-23Hexagon Head Cap Screw
- 5305-00-089-0268 MPN NAS1352-04-8PSocket Head Cap Screw
- 5305-00-102-3013 MPN NAS1623-9DMachine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-627-2883 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS2816-52H | National Aerospace Standards |